FJ Cruiser, rear door Molle panel
The FJ Cruiser rear door molle rack was designed to hold items such as your recover gear, molle bags, rifles, etc. The panel comes standard with the FJ letters. Shown was a custom biohazard one. If you want a custom setup we can do it for an additional $20. Pictured was one of our prototypes, the item you will get will have standard molle holes vs ovals as shown in the last picture of our overhead rack.
The AR15 shown is secured via our MAGA-zine mount which you can find in our tactical section.
To install, remove the screws and pop off the clips. Lay the panel on a table and lay the molle rack on top. WIth a sharpie pick up the holes and mark the plastic panel. Drill with a 1/8" bit and force the screws into all of the holes first. Then reinstall with the spacers and the nuts. The screws are larger than the hole and they will tap themselves in. Do not over tighten the screws. Verify that there is no obstruction behind the panel prior to drilling holes.